HW :: PADS Gerber 파일 만드는 순서

File -> CAM...

CAM Directory 설정

TOP SILK 생성

• Document Name : TOP_SILK
• Document Type : Silkscreen
• Output File : 01_TOP_SILK.pho
• Fabrication Layer : Silkscreen Top

• Layers 선택

  • Selected : Top, Silkscreen Top

    • Selected -> Top 선택

      • Board Outline 체크
      • Top Mounted 체크
      • Ref. Des. 체크
      • Outlines 체크

    • Selected -> Silkscreen Top 선택

      • Board Outline 체크
      • Top Mounted 체크
      • Lines 체크
      • Copper 체크
      • Text 체크
      • Outlines 체크

TOP PATTERN

• Document Name : 02_TOP_PATTERN
• Document type : Routing/Split Plane
• Output File : 02_TOP_PATTERN.pho
• Fabrication Layer : Top

• Layers 선택

  • Selected : Top

    • Board Outline, Top Mounted, Pads, Traces, Lines, Vias, Copper, Text

• Options 선택

  • X, Y Offset : 300, 300

TOP MASK

• Document Name : 03_TOP_MASK
• Document Type : Solder Mask
• Output File : 03_TOP_MASK.pho
• Fabrication Layer : Solder Mask Top

• Layers 선택

  • Selected : Top

    • Board Outline, Top Mounted, Pads

  • Selected : Solder Mask Top

    • Board Outline, Top Mounted, Copper

• Options 선택

  • X, Y Offset : 300, 300

BOTT SILK

• Document Name : 04_BOTT_SILK
• Document Type : Silkscreen
• Output File : 04_BOTT_SILK.pho
• Fabrication Layer : Silkscreen Bottom

• Layers 선택

  • Selected : Bottom

    • Board Outline, Bottom Mounted, Ref. Des., Outlines

  • Selected : Silkscreen Bottom

    • Board Outline, Bottom Mounted, Lines, Copper, Text

• Options 선택

  • X, Y Offset : 300, 300

BOTTOM PATTERN

• Document Name : 05_BOTT_PATTERN
• Document Type : Routing/Split Plane
• Output File : 05_BOTT_PATTERN.pho
• Fabrication Layer : Bottom

• Layers 선택

  • Selected : Bottom

    • Board Outline, Bottom Mounted, Pads, Traces, Lines, Vias, Copper, Text

• Options 선택

  • X, Y Offset : 300, 300

BOTTOM MASK

• Document Name : 06_BOTT_MASK
• Document Type : Routing/Split Plane
• Output File : 06_BOTT_MASK.pho
• Fabrication Layer : Solder Mask Bottom

• Layers 선택

  • Selected : Bottom

    • Board Outline, Bottom Mounted, Pads, Vias, Copper, Test Points

  • Selected : Solder Mask Bottom

    • Board Outline, Lines, Copper, Text, Test Points

• Options 선택

  • X, Y Offset : 300, 300

DRILL

• Document Name : 07_DRILL
• Document Type : Drill Drawing
• Output File : 07_DRILL.pho
• Fabrication Layer : <Unassigned>

• Layers 선택

  • Selected : Top

    • Board Outline, Top Mounted, Pads, Lines, Vias, Text

  • Selected : Drill Drawing

    • Board Outline , Top Mounted ,Lines, Text

• Options 선택

  • X, Y Offset : 300, 300

NC

• Document Name : 08_NC
• Document Type : NC Drill
• Output File : 08_NC.drl
• Fabrication Layer : <Unassigned>

• Options 선택

  • X, Y Offset : 300, 300

---------------------------------------------------------------
X-Y 좌표 생성
Tools -> Basic Scripting -> Basic Scripts -> 17-Excel Part List Report